The Rear Panel - Kurzweil SP6-7 Musician's Manual

The Rear Panel

POWER Button
Press the POWER button to power the SP6 on or off.
DC Power Jack
Plug the included power adaptor into the DC Power jack.
USB Ports
Use the USB ports to connect the SP6 to a computer/tablet or USB hard drive in order to do
the following:
• Use the SP6 as a MIDI controller to play software instruments on a computer/tablet.
• Use a computer/tablet to sequence multi-channel songs on the SP6.
• Backup and restore User Programs and Multis on a computer/USB hard drive.
• Update the software and sounds of the SP6.
MIDI IN and OUT Ports
Use the MIDI ports to communicate with other MIDI modules and controllers. The OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.
To use the SP6 as a MIDI controller for another sound module, use a MIDI cable to connect
the SP6's MIDI OUT port to the MIDI input port of the module that you want to control.
To control the SP6 using another MIDI controller, use a MIDI cable to connect the SP6's
MIDI IN port to the MIDI output port of the controller that you will be using.
Getting Started
The Rear Panel
1-9