Table of Contents
Advertisement
Multi Edit Mode
Switch Pedals Page
Switch Pedals Page
Use the Switch Pedals Page to select an assignment for each switch pedal in each Zone.
When a switch pedal is plugged into the SW1 (SUSTAIN) and/or SW2 jacks, use the
parameters in the SW1a and SW2a columns to select an assignment for the switch pedals in
each Zone.
When a dual switch pedal is plugged into the SW1 (SUSTAIN) jack, use the parameters
in the SW1a and SW1b columns to select an assignment for the dual switch pedals in each
Zone.
When a dual switch pedal is plugged into the SW2 jack, use the parameters in the SW2a and
SW2b columns to select an assignment for the switch pedals in each Zone.
Note: If a Switch Pedal Override has been selected in Global Mode, Multi Edit Mode will
display overridden functions with an asterisk "*" to indicate that the selected function has
been overridden. See
Overrides.
Each switch pedal can be assigned to these functions:
OFF
When OFF is selected, the selected pedal is disabled in the selected Zone.
Sust / Rota
When Sust is selected, the selected pedal is assigned to the Sustain function in the selected
Zone. Pedals assigned to Sust will sustain any note that is played in the selected Zone while
the pedal is pressed, for as long as the pedal is held.
For Zones containing KB3 Organ Programs, the Rota function is available instead of Sust.
The Rota assignment controls the Rotary Speaker speed, changing between fast and slow.
5-6
Switch Pedal Overrides on page 6-6
for details on Switch Pedal
Advertisement
Table of Contents
