Table of Contents
Advertisement
4. If you are using speakers and the SP6 is not loud enough, turn up the volume on your
amplifier or mixer.
5. If you are using a mixer and hear distortion, reduce the gain level on the mixer, or use
the mixer's Pad button if it has one (a button that typically decreases the audio input level
by 20dB).
6. After using the SP6, if you are using speakers, turn the master volume all the way down
on your amplifier or mixer before powering off the SP6.
Auditioning SP6 Sounds
1. The SP6 starts up in Program Mode. Use the PREVIOUS and NEXT buttons, ALPHA
WHEEL, or CATEGORY buttons to select a different Program. See
1-12
for more details on selecting Programs or Multis.
1. To hear a Program Demo song for the current Program, press the KEYPAD and ENTER
buttons simultaneously.
2. To hear the capabilities of the SP6, you can play the multi-channel demo songs. Press the
KEYPAD and DRUMS/PERC buttons simultaneously to listen to a multi-channel demo
song.
3. To switch between auditioning Programs or Multis, press the PROGRAM or MULTI
Mode button under the MODE label to the right of the LCD display.
Automatic Power Saving
The SP6 has an automatic power saving feature (Auto Power Off) that can automatically
power off the SP6 after a period of inactivity, in order to conserve electricity. The Auto Power
Off feature is enabled by default. The default Power Off Time is 8 hours, which will cause the
SP6 to power off after 8 hours of inactivity.
A count down timer warning will be shown in the LCD display a few minutes before the SP6
is powered off. At any time, touching any SP6 control or playing a note will cause the SP6 to
remain powered on, until the SP6 has been inactive for the set Power Off Time.
Auto Power Off can be disabled in Global Mode. The Power Off Time can also be adjusted
in Global Mode.
Getting Started
The Front Panel
SP6 Sounds on page
1-3
Advertisement
Table of Contents
