Table of Contents
Advertisement
Program Mode
Program Save Dialog
If you are saving a Program that has not been previously edited, the next available unused ID
number will be selected.
If you are saving a previously edited User Program, the ID number that the Program was last
saved with will be selected.
Press the PREVIOUS and NEXT buttons simultaneously to toggle between selecting the ID
number that the Program was last saved with and the next available unused ID number.
To change the ID number, use the ALPHA WHEEL, or use the keypad function of the
CATEGORY buttons to type an ID number (1025-2048) followed by pressing the ENTER
button. If you select an ID number that is already used by another Program, the bottom of
display will show a message to warn that you are going to replace a Program.
Naming a User Program
In the Save Dialog, you can name a Program by using the Program Name Page.
Use the CHANNEL/PAGE buttons to select the Program Name Page.
The display shows the current Program name. Program names can total 16 characters in
length.
To name a Program:
1. Use the PREVIOUS and NEXT buttons to move the cursor to each character.
2. Change the current character by using the ALPHA WHEEL, or use the keypad function
of the CATEGORY buttons to type a character.
To insert a space before the selected character, press and hold the NEXT button. The selected
character and all characters to the right will move one space to the right.
To delete the selected character, press and hold the PREVIOUS button. All the characters to
the right of the selected character will move one space to the left.
After naming the Program, press the SAVE button to return to the Program Save Page. On
the Program Save Page, press the SAVE button again to save the Program as a User Program.
2-12
Advertisement
Table of Contents
