Table of Contents
Advertisement
To create a Split in Multi Mode, the selected Multi must have at least one ZONE ON/
OFF button set to off (an inactive Zone). When creating a Split in Multi Mode, the lowest
numbered inactive Zone will be used for the new left hand Zone.
You can choose a Program that will be used in the new left hand Zone of the Split Multi.
Follow these steps to create a Split:
1. In Multi Mode, select a Multi for the right hand of the Split. The selected Multi must
have at least one ZONE ON/OFF button set to off (an inactive Zone).
2. Press the PREVIOUS and NEXT buttons simultaneously to access the "Split or Layer"
Page.
3. On the "Split or Layer" Page, use the PREVIOUS or NEXT buttons to select "Split
<ENTER>", then press the ENTER button.
4. On the "Split" Page, the lowest numbered inactive Zone is selected with a default
Bass Program selected for the left hand of the Split. Use the ALPHA WHEEL or
CATEGORY buttons to select a different Program for the left hand of the Split.
5. Additional Split parameters are described in
Use the CHANNEL/PAGE buttons to navigate between each of the 3 Split function
pages. Use the PREVIOUS or NEXT buttons to select each parameter, and the ALPHA
WHEEL or CATEGORY buttons to change the value of each parameter.
6. Press the SAVE button to save your Split as a Multi (See below for details on saving).
After saving your Split Multi, you can edit additional Multi parameters in Multi Edit
mode.
LAYER
When you create a Layer in Multi Mode, you are creating a copy of the selected Multi with a
new Zone which covers the entire keyboard.
To create a Layer in Multi Mode, the selected Multi must have at least one ZONE ON/
OFF button set to off (an inactive Zone). When creating a Layer in Multi Mode, the lowest
numbered inactive Zone will be used for the new Layer Zone.
You can choose a Program that will be used in the new Zone of the Layer Multi.
Split/Layer Parameters on page
Multi Mode
SPLIT/LAYER
4-8.
4-7
Advertisement
Table of Contents
