Kurzweil SP6-7 Musician's Manual page 20

Selecting Multis
In Multi Mode, use any of the methods below to select a Multi.
Browse All Multis
Make sure the USER button is off, then use the ALPHA WHEEL or PREVIOUS and
NEXT buttons to select a Multi from all of the available Multis.
Select a Multi by ID Number
The KEYPAD button allows you to use the numbers labeled on the CATEGORY buttons to
select Multis by ID number. Use the CATEGORY buttons to type an ID number followed
by pressing the ENTER button. Multis are not organized by category, so the KEYPAD
button is always on in Multi Mode.
Select a Previously Saved User Multi
Press and turn on the USER button, then use the ALPHA WHEEL or PREVIOUS and
NEXT buttons to browse only User Multis. To return to browsing Factory and User Multis,
press and turn off the USER button.
Controllers
The Knobs, Wheels, Pedals and Buttons can control each of the Factory Programs and
Multis, to produce variations to the sound. Don't forget to try these out as you explore the
Factory sounds on the SP6.
Generally, each control will perform the assignment labeled on the front panel, although
some controls may have different assignments per Program or Multi. When a controller
is moved, the name of the current assignment is shown in the LCD display. Controller
assignments can be adjusted in Program and Multi Edit Mode.
Favorites
Use the FAVORITES buttons to quickly store and recall a set of 5 favorite Programs and/or
Multis while in Program or Multi Mode.
To recall a favorite Program or Multi, simply press one of the FAVORITES buttons. The
FAVORITES buttons work from both Program or Multi Mode, and pressing a FAVORITES
button will automatically bring you to Program Mode or Multi Mode if required.
To assign the currently selected Program or Multi to a FAVORITES button, press and hold
the desired FAVORITES button for a few seconds until the LCD display indicates that the
favorite has been saved.
Getting Started
SP6 Sounds
1-13