Kurzweil SP6-7 Musician's Manual page 33

5. Additional Layer parameters are described in
Use the CHANNEL/PAGE buttons to navigate between each of the 3 Layer function
pages. Use the PREVIOUS or NEXT buttons to select each parameter, and the ALPHA
WHEEL or CATEGORY buttons to change the value of each parameter.
6. Press the SAVE button to save your Layer as a Multi (See below for details on saving).
After saving your Layer Multi, you can edit additional Multi parameters in Multi Edit
mode.
Split/Layer Parameters
The following parameters are available for each of the 4 Zones. The ZONE ON/OFF
parameters are controlled by using the front panel ZONE ON/OFF buttons.
The remaining parameters are accessed on each of the pages listed below. Use the
CHANNEL/PAGE buttons to navigate between each of the 3 Layer or Split function pages.
On these pages, the left hand Zn column indicates the Zone number associated with each of
the 4 rows of parameters.
ZONE ON/OFF
While creating a Split or Layer, Zones 3 and 4 can be turned On by turning on the ZONE
ON/OFF 3 and 4 buttons. By default the keyrange of Zones 3 and 4 cover the whole
keyboard range, allowing these Zones to be used as additional layers.
Split Page / Layer Page
Program
The default Split or Layer Program will appear in Zone 2. Use the ALPHA WHEEL or
CATEGORY buttons to select a different Program for Zone 2.
Split/Layer Parameters on page
Program Mode
SPLIT/LAYER
2-9.
2-9