Table of Contents
Advertisement
Program Mode
Controllers
MODULATION WHEEL
Use the MODULATION WHEEL to vary the modulation amount. The MODULATION
WHEEL will perform an assigned modulation for each Program. The name of the current
assignment is shown in the LCD display when the wheel is moved.
VARIATION Button
Pressing the VARIATION button will perform an assigned variation for each Program. The
name of the current assignment is shown in the LCD display when the button is pressed.
The VARIATION button has two states, off (not lit) and on (lit). The VARIATION button
will typically modify the sound by adding an orchestral string section or synth pad layer, or
enabling an effect.
For KB3 Organ Programs, the VARIATION button controls the Rotary Speaker speed,
changing between fast and slow. The LCD display shows "KB3" when a KB3 Program is
selected.
ARP ON/OFF Button
Use the ARP ON/OFF button to turn on and off the SP6's Arpeggiator.
The Arpeggiator takes note input from the keyboard and outputs a rhythmic and/or melodic
pattern of MIDI notes. The Arpeggiator can affect both the internal Programs and external
MIDI instruments.
The Arpeggiator settings can be adjusted in Program Edit Mode.
TAP TEMPO Button
Use the TAP TEMPO button to set the rate of the Arpeggiator or tempo synced FX (such as
Delay). Press the TAP TEMPO button a few times at the desired rate to set the tempo.
You can also set a tempo by pressing the TAP TEMPO button, then using the ALPHA
WHEEL or PREVIOUS/NEXT buttons to set a tempo, or use the keypad function of the
CATEGORY buttons to type a numeric value followed by pressing the ENTER button.
KNOBS
Press the SHIFT button to shift between 3 rows of 4 knob assignments.
2-4
Advertisement
Table of Contents
