Table of Contents
Advertisement
Troubleshooting
Pedal Problems
Pedal Problems
Switch Pedal Problems
Problem
Solution
Problem
Solutions
Problem
Solution
7-4
Sustain or Sostenuto pedals are stuck "on", or functioning
backwards ("on" when up instead of down)
Always plug pedals in before powering on the SP6, and do not
press the pedals before the SP6 has powered on. Turn power
off, then on, if necessary.
A switch pedal is not doing the expected function
Check the Global Mode Overrides page to see if you have
applied any pedal overrides.
If you have pedal problems in Multi Mode, use the Multi Edit
Mode Switch Pedals page to check the pedal settings for each
Zone in each Multi.
A dual switch pedal is not working correctly
A dual switch pedal must be wired as shown below. Any other
wiring pattern will not work correctly.
Left Pedal
Right Pedal
Sleeve
Ring
Tip
Advertisement
Table of Contents
