Table of Contents
Advertisement
Multi Mode
SPLIT/LAYER
CC (VOLUME) Pedal
The CC (VOLUME) pedal defaults to control Program volume (pre-FX).
For KB3 Organ Programs, the CC (VOLUME) pedal controls organ swell. Organ swell is
similar to Program volume, except volume can not be turned all the way down to silence.
The LCD display shows "KB3" when a Multi containing a KB3 Program is selected.
The CC (VOLUME) pedal can be enabled, disabled, or reassigned for each Zone in Multi
Edit Mode. Because of this, the pedals may function differently for each Zone in each Multi.
SPLIT/LAYER
Press the PREVIOUS and NEXT buttons simultaneously to access the Split/Layer function.
The Split and Layer functions have identical parameters, but produce different results.
The Split function allows you to quickly create a Multi such that keys in one range of the
keyboard produce different sounds than keys in another range.
The Layer function allows you to layer Programs and Multis such that more than one
instrument sound can be produced by playing one key.
The Split and Layer functions allow you to quickly create Multis without using Multi Edit
Mode to configure Zone key ranges, Programs, and volumes. After creating and saving a Split
or Layer Multi, you can edit additional Multi parameters in Multi Edit mode.
SPLIT
When you create a Split in Multi Mode, you are creating a copy of the selected Multi with a
new Zone which covers the left hand of the keyboard.
4-6
Advertisement
Table of Contents
