Kurzweil SP6-7 Musician's Manual page 74

Hide thumbs Also See for SP6-7:
Table of Contents

Advertisement

Global Mode
Settings Page
If you are not using an external MIDI device to play Multis, you can ignore this parameter
and leave it set to None. When Local Chan is set to None, an external MIDI device
transmitting on one channel will only play one Channel/Zone of a Multi.
In Program Mode, an external MIDI keyboard or sequencer transmitting on the Local Chan
will always play the Program on the currently selected Program Mode MIDI channel.
AutoPwrOff
The SP6 has an automatic power saving feature (Auto Power Off) that can automatically
power off the SP6 after a period of inactivity, in order to conserve electricity.
Use the AutoPwrOff parameter to enable or disable the automatic power saving feature.
When the AutoPwrOff parameter is set to On, the SP6 will automatically power off after
the Power Off Time has expired, from the last key press (physical or MIDI), button press,
controller movement, or USB MIDI activity.
A count down timer warning will be shown in the LCD display a few minutes before the SP6
is powered off. At any time, touching any SP6 control or playing a note will cause the SP6 to
remain powered on, until the SP6 has been inactive for the set Power Off Time.
APwrOffTime
Use the APwrOffTime parameter to set the Power Off Time. If the AutoPwrOff parameter is
set to On, then the SP6 will automatically power off after the Power Off Time has expired,
from the last key press (physical or MIDI), button press, controller movement, or USB
MIDI activity.
A count down timer warning will be shown in the LCD display a few minutes before the SP6
is powered off. At any time, touching any SP6 control or playing a note will cause the SP6 to
remain powered on, until the SP6 has been inactive for the set Power Off Time.
MultiChange
Use the MultiChange parameter to set the behavior of how Multis are loaded when selecting
a Multi in Multi Mode.
When MultiChange is set to Immediate, a selected Multi will be loaded immediately.
When MultiChange is set to AllKeysUp, a selected Multi will be loaded when you've released
all currently held notes.
6-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp6

Table of Contents