The Split And Layer Soft Buttons - Kurzweil K2700 Musician's Manual

Program Mode

The Split and Layer Soft Buttons

The Split and Layer Soft Buttons
The Split and Layer functions have identical parameters, but produce different results.
The Split function allows you to quickly create a Multi such that keys in one range of the
keyboard produce different sounds than another range.
The Layer function allows you to layer Programs and Multis such that more than one
instrument sound can be produced by playing one key.
The Split and Layer functions allow you to quickly create Multis without using Multi Edit
Mode to configure Zone key ranges, Programs, and volumes. After creating and saving a Split
or Layer Multi, you can edit additional Multi parameters in Multi Edit mode.
The Split Function
When you create a Split in Program Mode, you are creating a Multi with two Zones set to
On.
The Program you were using in Program Mode is used in the right hand of the Split as the
Zone 1 Program. You can choose a Program that will be used in the left hand of the Split as
the Zone 2 Program.
Follow these steps to create a Split:
1. In Program Mode, select a Program for the right hand of the Split.
2. Press the SPLIT soft button.
3. On the "Split" Page, Zone 2 is selected with a default Bass Program selected for the left
hand of the Split. Use the ALPHA WHEEL or CATEGORY buttons to select a different
Program for the left hand of the Split.
2-8