Chapter 4
Programming SP2
Easy Editing (Auto Layer / Split)
With the AutoSplit feature, users can create new sounds very easily. Tasks such as mixing
additional sounds with current ones or splitting the keyboard into multiple parts, each with a
different sound, can be done in a very convenient way. Basically, current programs are set to
Main sound. You can easily layer additional sounds on top of it or split keyboard into multiple
zones with different programs in each, using [Layer] and [Split] button.
Layering
Layering is playing two sounds on the same part of the keyboard.
The procedure is as follows:
1.
Select a program. If you want to mix another sound with it, press [Layer] button.
2.
The LED on the [Layer] button will blink red and the display will look like < Figure 4‐1
>, which means the first sound from the first category will be layered. ("L"ayer
Program "0" from Category "1")
3.
Or, you can select another sound to be layered with the Sound Select button
4.
If you want to change your Main sound, press [Main] button and use Sound Select
button. (In this case, the display will look like < Figure 4‐2 >)
4-2
< Figure 4‐1 >
< Figure 4‐2 >