Advertisement
Available languages
Available languages
TROUBLE SHOOTING GUIDE
Fault
Code
E01
The wire from computer to
bottom control board
didn't connected well
E02
Protect the exploding
E05
Over current Protection
Main reason
． Check the connection wire between
1
computer and control board was well
connected.
2． Make sure the IC on the control board
was well inserted. If not re-insert.
3． Abnormal power supply in control
board. Please change a new control
board.
1． Bad contact with motor open
circuit. Please change a new
motor or check the
connector.
2． Power tube was puncture.
Please change a new Power
tube or control board.
1． Overloaded.
2． Running board with heavy
resistance. Need to be oiled
65
Solution
Advertisement
