Advertisement
Available languages
Available languages
If the deviation phenomenon is caused by the uneven force of the user's feet,
no-load rotation for a few minutes can make it normal. For deviation
phenomenon that can't return to normal automatically, adjust step by step by
using 6MM inner hexagon spanner with the machine and with quarter-circle as
the unit. Running belt deviation is not covered in the warranty scope and is
mainly maintained by users according to the instruction book. Deviation
phenomenon will severely damage the running belt, so it should be found and
corrected in time.
the screw on the left side clockwise
如果跑带左偏,则顺时针调节左
or the screw on the right side
边螺丝或逆时针调节右边螺丝
anticlockwise.
5. Driving belt adjustment
All the treadmills' driving belts are adjusted before leaving the
factory, but after using for a period, it may still occur slip, which
is mainly adjusted by users.Adjustment steps (see the picture):
1. Clockwise rotate adjustment screw with spanner.
2. Adjustment scope is subject to no slip when loading.
Notice: Periodically clean the impurities in the belt groove and the belt wheel
groove.
6. Treatment method of running belt slip or pause
First open the front motor cover, then open the treadmill, hold the hand grip
with both hands, step on the belt hard with your feet, watch it is the conveyor
belt of the motor that pauses or the running belt that pauses. If running belt
pauses, adjust the running belt, while if conveyor belt of the motor pauses,
adjust the motor.
If deviate to the left, then adjust
If deviate to the right, then
adjust the screw on the right side
如果跑带右偏,则顺时针调节右
clockwise or the screw on the left
边螺丝或逆时针调节左边螺丝
side anticlockwise.
64
Advertisement
