Master F-13 User Manual page 60

into the USB slot. Music will play automatically from the drive and can be controlled
using the "Last Song" and "Next Song" buttons. Volume can be increase and decreased
using the volume controls.
SMART: The treadmill will remember the current trajectory with SMART mode, such as
the speed of different time periods. Trajectory data will be saved if running time is more
than 10 minutes, otherwise it will be discarded.
Next time the treadmill is use the previous trajectory settings will be loaded when using
SMART mode. If the speed or incline is changed manually during use this will erase the
previous trajectory settings and create a new one if the running time is more than 10
minutes.
MODE
H-1 Time mode: The split window of TIME begins blinking. The initial pre-set target time
is 15:00 minutes. Press the SPEED+/SPEED- button on the computer console to
change the setting. The pre-set training program time range is from 5:00 to 99:00
minutes. Once you select training time, press the START/STOP button on the console to
start exercise, the screen will countdown 3 seconds before the running belt starts
moving. When the pre-set training program time counts down to 0, the computer will
beep to alert you, the treadmill will stop automatically.
H-2 Distance mode: The split window of DISTANCE begins blinking. The initial pre-set
target distance is 1km. Press the SPEED+/SPEED- button on the computer console to
change the setting. The pre-set training program distance range is from 0.5km to
99.9km. Once you pre-set training program distance, press the START/STOP button on
the computer to start exercise, the screen will countdown 3 seconds before the running
60