Master F-13 User Manual page 53

When installing, first simply fix all the screws, and then tighten up after the
shelf has been installed.
Step1
Upright:
1. Uplift part of the upright and electronic watch
dial, use one M8*45 screw respectively on both
sides of the treadmill to pass through the below
connection hole, add the shims and tighten up the
screws.
2. Tighten up the two uprights with two M8*20
Screws。
Step 2
Electronic watch and hand grip
Tighten up the hand grips on both
sides with M8*20 screw separately
by making them pass through
handgrip hole and connected with
The uprights.
Three Installation steps
53