Table of Contents
Advertisement
Engine Blower
The optical engine blower (505-0071-xx) consists of the 30mm blower and a strip of double-sided
adhesive tape that adheres the blower to the optical engine chassis. The optical engine blower moves air
across the front of the lamp module, directing excessive heat away from the optical engine. The optical
engine blower is also included with a new engine.
1
Remove the following items:
Front bezel (see page 11)
Rear bezel (see page 15)
Top case (see page 18)
Controller ECA (see page 34)
Optical engine (see page 45)
2
Use a small flat-blade screwdriver to gently pry the blower away from the optical engine chassis.
TDP-P4 Service Manual
53
Advertisement
Table of Contents
