Front Bezel Latch - Toshiba TDP-P4 Service Manual

Front Bezel Latch

The front bezel latch (505-0918-xx) fastens to the side of the bottom case and engages the front bezel to
lock it in position on the projector. It consists of an actuator and a spring. A slot on the side of the bottom
case allows access to the latch. Releasing the latch allows the front bezel to be removed from the
projector. A new bottom case (505-0812-xx) includes the front bezel latch.
1 Remove the following items:
Front bezel (see page 11)
Lamp module (see page13)
Rear bezel (see page 15)
Top case (see page 18)
2 Squeeze the tab on the side of the power supply cable connector and unplug it from the ballast
assembly.
TDP-P4 Service Manual 41