Toshiba TDP-P4 Service Manual page 33

Assembly Notes
♦
Ensure that the airflow direction arrow on the top of the fan points toward the front of the projector
and that the fan cable wires route through the slot in the fan housing.
♦
Position the fan against the bracket on the optical engine chassis.
♦
Replace the M2.5x6 screw that secures the fan to the optical engine chassis. Tighten the screw to 3
in.-lbs. (.339 N m).
♦
Reconnect the cables to the controller ECA.
TDP-P4 Service Manual 33