Assembly Notes
♦
When you replace the bottom case, remove the serial number label from the certification label on the
old bottom case. You can use a heat gun or hair drier to loosen the serial number label on the old
bottom case. Take care not to ruin the label by applying too much heat. Attach the serial number label
to the certification label on the new bottom case.
♦
The certification label (020-1077-xx) fits into the recessed area on the outside of the bottom case. If
you need to replace it, be sure to remove the serial number label (above) and adhere it to the new
certification label.
TDP-P4 Service Manual
60