Rear Bezel
The rear bezel (505-0901-xx) covers the rear of the projector and fits between the top case and the
bottom case. It fastens to the projector with one M2.5x6 Torx screw.
1
Use a T-8 Torx driver to remove the M2.5x6 Torx screw from the rear bezel.
2
Gently pry the rear bezel away from the projector.
You may need to use a small screwdriver. Do not pry around the edge of the bezel. Instead,
reach in between the power button and the bezel.
TDP-P4 Service Manual
15