Toshiba TDP-P4 Service Manual page 10

5 Turn the engine right side up.
6 Remove the two M2x3 screws.
7 Pull the zoom ring off of the lens barrel.
Assembly Notes
♦
Fasten the zoom ring to the side of the lens barrel with the three M2x3 screws with star washers.
Tighten the screws to 2 in.-lbs. (.226 N m).
♦
Snap the focus ring around the front of the lens, making sure that the three recesses in the focus ring
engage the three tabs on the sides of the lens.
TDP-P4 Service Manual 10