Toshiba TDP-P4 Service Manual page 22

3 From the outside of the top case, lift the keypad up, allowing the keypad cable to slide through
and out of the slot.
Assembly Notes
♦
Make sure to route the keypad through the slot in the top case and that the cable folds at 90 degrees
to extend from the rear of the top case.
♦
Place the keypad into its recess in the top case, being careful to avoid kinking the cable. Then gently
press the keypad into place. Take care not to bend the tabs on the back of the keypad.
TDP-P4 Service Manual 22