Table of Contents
Advertisement
The selected files appear in the FlashUSB dialog box. The Status indicator at the bottom of the
dialog box reads Connecting. This tells you that the computer is attempting to establish a
connection with the TDP-P4.
4
On the TDP-P4 keypad, press and hold the menu and the resync buttons.
5
While holding the buttons down, power up the projector.
NOTE
If you're upgrading a TDP-P4 for the first time, you may see Windows 98 New Hardware
Wizard. Follow the instructions, then continue with this procedure.
6
Hold the keys down firmly after you power up the projector. The projector should go to 'load
state', where the fans are running and the green LED glows, but the lamp does not light.
The Status: Connecting... message changes to Status: Connected. The Download button
becomes available
TDP-P4 Service Manual
68
Advertisement
Table of Contents
