Table of Contents
Advertisement
Names of the terminals on the rear panel
(1)
(2)
(3)
Name
(1) CONTROL terminal
(2) AUDIO (L/R) terminal
(3) VIDEO terminal
(4) S-VIDEO terminal
(5) AUDIO IN terminal
(6) COMPUTER 1 IN terminal
(7) AUDIO OUT terminal
(8) COMPUTER 2 IN terminal
(Also used for MONITOR OUT terminal)
(9) Switch
All manuals and user guides at all-guides.com
(4)
(6)
(8)
(5)
(7)
: Main Function
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
: Input audio signals from video equipment.
: Input video signals from video equipment.
: Input S video signals from video equipment.
: Input audio signals from a computer, or from video
equipment with a component video signal output
terminal.
: Input RGB signal from a computer or other source or a
component video signal (Y/P
equipment.
: Outputs audio signals.
: Inputs RGB signal from a computer or other source or
a component video signal (Y/P
equipment. It can also be used as MONITOR OUT
terminal by the switch of (9).
: Switches between COMPUTER 2 IN and MONITOR
OUT.
COMPUTER 2 IN
(Y/P
/P
2)
B
R
/MONITOR OUT
18
(9)
p.53
/P
) from video
B
R
/P
) rom video
B
R
Preparing and us
■ Loading dry-cell batteri
into the remote control
q Remove the battery cover.
w Insert the dry-cell batteries.
Be sure to align the plus and minu
ends of the batteries properly.
e Replace the battery cover.
Dry-cell batteries
• Before using the batteries, be sure
previous pages.
• Remove batteries from remote cont
• If the remote control stops working,
new ones.
The remote control
• The remote control may fail to opera
sunlight or fluorescent lighting.
• Do not drop or bang.
• Do not leave in hot or humid locatio
• Do not get wet or place on top of we
• Do not take apart.
• In rare cases, ambient conditions co
happens, point the remote control a
Advertisement
Table of Contents
