Settings For The Entire Fantom; Settings; Saving The System Settings; System Parameter - Roland Fantom-06 Reference Manual

Settings for the Entire FANTOM

Basic Procedure for System Settings
1 .
Press the [MENU] button.
The MENU screen appears.
2 .
Touch <SYSTEM>.
The SYSTEM screen appears.
Menu Explanation
[E1] Scrolls up or down through the tabs.
[E2] Scrolls the cursor up or down.
Edits the value of the parameter selected
[E6]
by the cursor.
3 .
Switch between the tabs in the left side of the
screen to select the desired screen.
4 .
Select the desired parameter, and change its
value.
Tab Explanation
GENERAL Specifies overall settings.
KEYBOARD Specifies keyboard settings.
PEDAL Specifies pedal settings.
WHEEL 1/2 Specifies wheel settings.
S1/S2
Specifies [S1] and [S2] button settings.
SLIDER
Specifies slider settings.
KNOB Specifies knob settings.
USB Specifies USB settings.
MIDI Specifies MIDI settings.
SOUND Specifies settings related to sound.
Specifies synchronization and tempo
SYNC/TEMPO

settings.

SEQUENCER
Configures the sequencer-related settings.
CLICK
Specifies click tone settings.
NOTE PAD Specifies note pad settings.
Specifies settings related to control
CONTROL
functions.
Shows the license information for this
LICENSE
instrument.
INFO Shows information about this unit.
164 164

Saving the System Settings

If you want to save the system settings that you changed, execute
the Save operation.
1 .
On the SYSTEM screen, press the [WRITE] button.
When the save is completed the indication "Completed"
appears.

System Parameter

Overall Settings
(GENERAL)
Parameter Value
Auto Off OFF, 30, 240
VENDOR
USB Driver
GENERIC
File Verify OFF, ON
LCD
1–20
Brightness
LED
OFF, 1–5,
Brightness
MAX (default)
WHEEL LED OFF, 1–5,
Brightness MAX (default)
Zone Sw
OFF, ON
Indicator
(default)
Zone Int/Ext
BASIC,
Control ADVANCED
SLOW,
Encoder
NORMAL,
Speed
FAST (default)
OFF (default),
Scene Remain
ON
Startup
Startup Scene A001–D128
Pad Mode
(p. 104)
Time Stamp
Year/Month/
Day/Hour/ –
Minute
Explanation
Specifies whether the unit will turn off
automatically after a certain time has
elapsed.
If you don't want the unit to turn off
automatically, choose "OFF" setting.
The dedicated USB driver is used.
The generic driver provided by the
operating system is used.
Verifies the correctness of the file
when copying or backing-up. This
provides higher reliability, but requires
more time to execute.
Adjusts the brightness of the screen.
Adjusts the brightness of all LEDs that
are lit.
* When the SYSTEM screen is shown,
you can also change the value by
pressing tone category buttons
[1]–[6].
Adjusts the brightness of the WHEEL 1
and 2 LEDs.
If this is "ON", the ZONE INT/EXT
buttons of zones whose sound engine
is heard when you play the keyboard
will blink.
Configures the zone section
operations (p. 8).
Selects the amount by which the
value changes when you rapidly turn a
FUNCTION knob [E1]–[E6].
Specifies whether the sound from the
previous scene carries over (ON) or
not (OFF) when you select a different
scene.
* When this is ON, zones 9–16 do not
make any sound.
MEMO
When you set the rhythm pattern to
one of zones 1–8, you can use the
rhythm pattern with the Scene Remain
function on.
Selects the scene that is loaded when
the power is turned on.
Specifies the pad mode when the
power is turned on.
The date and time that you specify
here is used as the timestamp for files
created by the FANTOM.