Placing This Unit On A Stand; If You're Using The Fantom-06/Fantom-07 - Roland FANTOM-06 Owner's Manual

Placing This Unit on a Stand

Be careful not to pinch your fingers when setting up the stand. Place the instrument on the stand as follows.
* When using the KS-10Z, ensure that the height of the unit is one meter or lower.

If You're Using the FANTOM-06/FANTOM-07

If you want to place the FANTOM-06/FANTOM-07 on a stand, please use the KS-12, KS-10Z or KS-20X stands manufactured by Roland.
* The illustration shows the FANTOM-06.
KS-10Z
Align the front of the
FANTOM with the
front of the stand
KS-12
KS-20X
Line up the
FANTOM so that
it rests on the
rubber rings of
the stand.
6
Adjust the width of the stand so that the
stand arms are lined up between the
rubber feet of the FANTOM.
Top view
Adjust the horizontal width of the
stand so that the rubber feet on the
keyboard side of the FANTOM fit
into the holes that are provided to
accommodate them.
Top view
FANTOM-06:
Open up the stand from closed
position past the fourth stop (with the first stop
being the closed position, and the fifth stop being
the fully open position).
FANTOM-07:
Open up the stand from closed
position past the fifth stop (with the first stop
being the closed position, and the sixth stop being
the fully open position).