Editing A Scene (Zone); Editing The Overall Scene; Initializing A Scene (Utility); Editing A Zone - Roland Fantom-06 Reference Manual

Editing a Scene

Editing the Overall Scene

Scene parameters are common to all zones, and apply to the entire
scene.
1 .
Select a scene.
2 .
Press the [MENU] button.
The MENU screen appears.
3 .
Touch <SCENE EDIT>.
The SCENE EDIT screen appears.
Menu Explanation
[E1]
Scrolls up or down through the tabs.
[E2]
Scrolls the cursor up or down.
Edits the value of the parameter selected by the
[E6]
cursor.
<UTILITY> Accesses the UTILITY window.
4 .
Select the desired parameter and edit its value.
NOTE
The edited scene is temporary. It is lost when you turn off the
power or select another scene. If you want to keep the settings,
save the scene (p. 56).
Scene Parameter
Tab Explanation
GENERAL Specifies the scene volume and tempo.
Specifies the MIDI messages that control
CONTROL
parameters when using Tone Control 1–4.
Specifies the MIDI messages that control
PEDAL
parameters when using pedals connected to the
PEDAL jacks.
Specifies the MIDI messages that control
KNOB parameters when using the control knobs with
ASSIGN 1.
Specifies the MIDI messages that control
SLIDER
parameters when using the sliders with ASSIGN 1.
Specifies the MIDI messages that control
S1/S2
parameters when using the [S1]/[S2] buttons.
Specifies the MIDI messages that control
WHEEL1/2
parameters when using WHEEL 1 and 2.
Configures the vocoder parameters.
VOCODER
* AUDIO IN must be turned on to use this.
Sets whether to use the sequencer or the SMF
SONG
player.
MEMO
For details on the parameters, refer to "Parameter Guide" (PDF).
54 54
(Zone)
Initializing a Scene
1 .
2 .
3 .

Editing a Zone

Zone parameters are the parameters related to the zones, and are
set individually for each zone. There are 16 zones, and each zone
has its own settings for volume (Level), equalizer (EQ), and Key
Range (KBD) etc.
1 .
2 .
3 .
(UTILITY)
On the SCENE EDIT screen, touch <UTILITY>.
The UTILITY window appears.
Menu Explanation
SCENE
Initializes all settings of the current scene.
INITIALIZE
Initializes only the current scene's parameters that
are related to sound control.
MEMO
SOUND
CONTROL
The parameters in question (CUTOFF, RESONANCE,
INITIALIZE
ATTACK, DECAY, RELEASE, VIB RATE, VIB DEPTH, VIB
DELAY) are in the OFFSET and VIBRATO tabs on the
ZONE EDIT screen.
Select the function that you want to execute, and
then select [E6] SELECT.
Alternatively, you can directly touch a menu item.
A confirmation message appears.
Select [E5] OK.
Initialization is executed, and you return to the SCENE EDIT
screen.
If you decide to cancel, choose [E6] CANCEL.
Select a scene.
Press the [MENU] button.
The MENU screen appears.
Touch <ZONE EDIT>.
The ZONE EDIT screen appears.
Menu Explanation
[E1] Scrolls up or down through the tabs.
[E2] Scrolls the cursor up or down.
[E3] Scrolls left or right through the parameters.
[E5] NUMERIC Accesses the NUMERIC window.
Edits the value of the parameter selected by the
[E6]
cursor.
<UTILITY>
Accesses the UTILITY window.