Table of Contents
Advertisement
Specifying the tone played by each pad
1 .
In the NOTE PAD screen, press a pad to select the
pad that you want to edit.
You can also select a pad by using the [E1] knob or by
directly touching an icon in the screen.
2 .
Move the cursor to the parameter that you want
to edit, and edit the value.
You can also use the [E4]–[E6] knobs to directly edit the
settings.
Pad number
Corresponding tone name/drum instrument name
Zone/Note number/Velocity
3 .
Repeat steps 1–2 to make settings for other pads
as necessary.
4 .
To save the settings, choose SYSTEM WRITE [E3] to
save them to the system.
MEMO
The parameters that you edit here are the same as the system
parameters "Pad 1–16 Zone", "Pad 1–16 Note Number", and "Pad
1–16 Velocity" that you can edit in SYSTEM/NOTE PAD. They work in
the same way when you edit them in the SYSTEM screen.
Selecting Partials and Turning Them On/Off
(Partial Sw/Sel)
You can use the pads to select and turn on/off the partials that
you're editing.
Pad
Explanation
[1]
Select partial 1
[2]
Select partial 2
[3]
Select partial 3
[4]
Select partial 4
[5]
Turn partial 1 on/off
MEMO
¹ For a drum kit tone, you can select and turn on/off the wave
of the selected key.
¹ This function might be disabled, depending on the tone
being used.
Pad
Explanation
[6]
Turn partial 2 on/off
[7]
Turn partial 3 on/off
[8]
Turn partial 4 on/off
Assigning Convenient Functions to the Pads (PAD MODE)
Controlling a DAW
(DAW Control)
You can use the pads to control supported DAW software (Logic Pro
X/MainStage/Ableton Live).
NOTE
¹ Use this function when you want to use the "DAW CTRL
function" to control Logic Pro X/MainStage/Ableton Live on a
computer connected via USB.
¹ In order to connect the FANTOM with a computer, you'll need
to install a USB driver. For details on installing the USB driver,
refer to "Connecting to Your Computer" (p. 142).
¹ To use the DAW/CTRL function in Logic/MainStage, you must
install the dedicated "Logic/MainStage plug-in" as well as the
USB driver.
For details on using the DAW CTRL function and how to
install the plugin, refer to "DAW Integration Usage Guide"
(PDF).
Controlling Logic Pro X
Pad
Function
Recall Screen
[1]–[4]
Set 1–4
ZOOM
[5]
Horizontal IN
ZOOM
[6]
Horizontal
OUT
ZOOM Vertical
[7]
IN
ZOOM Vertical
[8]
OUT
Open Marker
[9]
List / Close
Window
Go to Next
[13]
Marker
Go to Previous
[14]
Marker
Song Position
[15]
by measure
[16]
Play or Stop
Explanation
Recall screen sets 1–4.
Zooms-in horizontally.
Zooms-out horizontally.
Zooms-in vertically.
Zooms-out vertically.
Opens/closes the marker list.
Moves to the next marker.
Moves to the previous marker.
Advances the locate position by one
measure.
While playing, operates as the stop
button. While stopped, operates as
the play button.
105
105
Advertisement
Table of Contents
