Selecting Partials; Editing In The Tone Edit Pro Screen - Roland Fantom-06 Reference Manual

Explanation
Black: common
Tab
Blue: PRO screen only Blue: PRO screen only
Green: ZOOM screen only Green: ZOOM screen only
COMMON Settings for the entire tone.
Settings that specify how the partials are
STRUCTURE
combined.
KEYBOARD KEYBOARD Settings for key range and velocity range. Settings for key range and velocity range.
Settings for the waveform that is the basis of the
OSC
tone.
Pitch
Settings related to pitch.
PITCH ENV
Settings for the pitch envelope.
FILTER Settings related to the filter.
FILTER ENV Settings for the filter envelope.
AMP Settings related to volume.
AMP ENV Settings for the amp envelope.
LFO Dest LFO Dest Settings for the LFO that modulates the sound. Settings for the LFO that modulates the sound.
Settings for the LFO waveform and modulation
LFO1–2
speed.
STEP LFO1–2
Settings for modulating the sound in 1–16 steps.
PARTIAL EQ Settings for the equalizer of the partial.
OUTPUT OUTPUT Settings related to output. Settings related to output.
CONTROL CONTROL Settings for the controllers. Settings for the controllers.
MATRIX
Settings for matrix control 1–4.
CTRL1–4
MFX MFX Settings related to multi-effects. Settings related to multi-effects.
MFX MFX
Settings for controlling MFX via MIDI. Settings for controlling MFX via MIDI.
CONTROL CONTROL
* For details on the tone parameters, refer to "Parameter Guide"
(PDF).

Selecting Partials

Select the partial.
TONE EDIT screen
Operation Explanation
Touch the Partial 1–4
Selects the partial you press.
tab
Touch the [SHIFT] +
Selects multiple partials that you press.
Partial 1–4 tab
When PAD MODE is set to "Partial Sw/Sel"
Operation Explanation
Press the pad [5]–[8] Selects the partial you press.
Press pads [5]–[8]
Selects the partials you press together.
together
Press the [SHIFT] +
Selects multiple partials that you press.
pad [5]–[8]

Editing in the TONE EDIT PRO Screen

The TONE EDIT PRO screen shows all parameters, allowing you to
edit in greater detail.
1 .
On the TONE EDIT ZOOM screen, touch <To PRO>.
The TONE EDIT PRO screen appears.
Menu Explanation
[E1]
Scrolls up or down through the tabs.
Scrolls the cursor up/down to select a
[E2]
parameter.
Edit the partial selected by the cursor
separately for each partial.
[E3]–[E6]
[E3]–[E6] correspond to Partial 1–4
respectively.
Partial Sw Turn a partial on/off. Partials that are off do
not produce sound.
Select a partial to edit. If multiple partials
are selected, you can edit their parameter
Partial Select
values simultaneously.
Selected Deselected
* You can't deselect Partial Select for all
<To ZOOM> Accesses the TONE EDIT ZOOM screen.
<UTILITY> Accesses the UTILITY window.
2 .
Move the cursor to the desired parameter, and
edit the value.
You can use the [INC] [DEC] buttons and the [VALUE] dial
to edit the value while maintaining the value difference
between partials.
Editing a Tone
partials.
59 59