Roland Fantom-06 Reference Manual page 9

Controller Explanation
ZONE INT/
When the applicable
EXT buttons
zone is the current zone
status
BASIC
The internal sound engine and
the external sound module both
produce sound when you play
the keyboard.
Unlit
ADVANCED
(COMMON)
The internal sound engine and
external sound module play only
when the ZONE INT/EXT buttons
for all zones are off (unlit) and
you play the keyboard.
BASIC
The internal sound engine
produces sound when you play
Lit red the keyboard.
(INT)
ADVANCED
The internal sound engine produces sound when you play the
keyboard.
BASIC
The external sound module
produces sound when you play
Lit green the keyboard.
(EXT)
ADVANCED
The external sound module produces sound when you play the
keyboard.
ADVANCED
Lit yellow
The internal sound engine and the external sound module both
(BOTH)
ADVANCED only
produce sound when you play the keyboard.
Lit orange
The sound engine is muted. The internal sound engine does not
produce sound.
(MUTE)
MEMO
Set the operation mode (BASIC/ADVANCED) for the ZONE section in
"Zone Int/Ext Control" of the system parameters (p. 164).
BASIC
[SHIFT] +
Red
ZONE INT/EXT button
INT
ZONE INT/EXT
button
Unlit
COMMON
ADVANCED
Yellow
BOTH
Red
INT
Unlit
COMMON
When the applicable
zone is not the current
zone
Neither the internal sound
engine nor the external sound
module produce sound when
you play the keyboard.
*
You can use the internal
sequencer or MIDI data from
an external device to play
the internal sound engine.
Only if the ZONE INT/EXT button
of another current zone is on (lit
red or green), the internal sound
engine produces sound when
you play the keyboard.
Only if the ZONE INT/EXT button
of another current zone is on (lit
red or green), the external sound
module produces sound when
you play the keyboard.
Green
EXT
Orange
MUTE
Set in the MIXER screen
ZONE INT/EXT
button
[SHIFT] +
ZONE INT/EXT button
ZONE INT/EXT button
Green
EXT
Orange
MUTE
Set in the MIXER screen
Controller Explanation
Various parameters or functions can be
assigned to these sliders.
Sliders [1]–[8]
The parameters that can be controlled
depend on the function select buttons
located at the left.
[SPLIT] button Turns the split function on/off.
[CHORD MEMORY]
Turns the chord memory function on/off.
button
[ARPEGGIO] button
Turns the arpeggiator on/off.
Hold down this button and use the OCTAVE
[TRANSPOSE] button
[DOWN] [UP] buttons to raise or lower the
pitch range in semitone steps.
OCTAVE [DOWN] [UP] Raise or lower the pitch range in steps of an
button octave.
Common section
3
Controller Explanation
The WRITE screen appears.
[WRITE] button
Saves a scene or tone.
The TFX ZOOM EDIT screen appears.
[MASTER FX] button
If you hold down the [SHIFT] button and press
this button, the routing screen appears.
[MOTIONAL PAD]
The MOTIONAL PAD screen appears.
button
[DAW CTRL] button
Lets you use this unit as a DAW controller.
[MENU] button The MENU screen appears.
Shows various information depending on
Display
operation.
Turning a knob modifies the function or
parameter value that is shown below in the
FUNCTION knobs
screen.
[E1]–[E6]
You can also press these knobs in to execute
an operation or confirm a value.
The TEMPO screen appears.
[TEMPO] button
You can set the tempo by repeatedly pressing
the button at the desired interval.
Changes a value.
If you hold down the [SHIFT] button and turn
[VALUE] dial
the [VALUE] dial, the value changes more
greatly.
Changes a value.
If you press one of these buttons while
holding down the other, the value changes
[DEC] [INC] button more rapidly.
If you press one of these buttons while
holding down the [SHIFT] button, the value
changes more greatly.
Move the cursor position up/down/left/right.
Cursor [à] [á] [ã] [â]
buttons
These buttons also switch between screens.
Accesses the corresponding edit screen when
[SHIFT] button
pressed together with another button.
This button returns to the previous screen or
closes the open window.
If you press this button while holding down
the [SHIFT] button, an all note-off message is
[EXIT] button
output to the sound engine and via MIDI.
This is useful for muting sounds including the
sounds of external devices that keep playing,
and in other similar instances.
Used to confirm a value, execute an operation,
[ENTER] button
or view lists or other items.
Panel Descriptions
9 9