Settings That Are Saved For The Entire System; Rotary-Related Settings - Roland VK-88 Owner's Manual

Settings That Are Saved for
the Entire System

■ Rotary-related Settings

1.
[BANK] button and press the ROTARY SOUND [ON]
button.
The indicators of the [1]–[8] buttons ([1]–[7] buttons) will
blink.
2.
Press one of the [1]–[8] buttons ([1]–[7] buttons) to
select the parameter that you want to edit.
There are 15 rotary-related parameters. You can select all
of these parameters by controlling the lighted/
extinguished state of the [BANK] button's indicator.
The following parameters are assigned to each button.
[BANK] button's indicator extinguished
Button Parameter
[1] ROTARY WOOFER LEVEL
[2] ROTARY TWEETER LEVEL
[3] ROTARY WOOFER RISE TIME
[4] ROTARY TWEETER RISE TIME
[5] ROTARY WOOFER FALL TIME
[6] ROTARY TWEETER FALL TIME
[7] ROTARY WOOFER SPREAD
[8] ROTARY TWEETER SPREAD
[BANK] button's indicator lighted
Button Parameter
[1] ROTARY WOOFER SPEED SLOW
[2] ROTARY TWEETER SPEED SLOW
[3] ROTARY WOOFER SPEED FAST
[4] ROTARY TWEETER SPEED FAST
[5] ROTARY MIC DISTANCE
[6] ROTARY RANDOMIZE
ROTARY INDICATOR SYNC
[7]
SOURCE
3.
Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [UPPER]
button, the setting will return to the initial value.
4.
If you want to adjust the setting of another parameter,
press the [BANK] button and the appropriate button
from [1] through [8] (from [1] through [7]) to select the
parameter, and turn the [VIBRATO AND CHORUS]
knob to adjust the setting.
When you want to stop editing, press the [H-BAR
MANUAL] button.
5.
Press the [WRITE] button to finalize the settings of the
rotary-related parameters.
Parameter settings will be saved.
The indicators for the [1]–[8] buttons light up while the
settings are being saved.
Page
NOTE
p. 66
Never turn off the power while parameters are being
p. 66
saved.
p. 66
p. 66
p. 66
p. 66
p. 66
p. 66
Page
p. 66
p. 66
p. 66
p. 66
p. 66
p. 66
p. 66
Advanced Use
65