Table of Contents
Advertisement
Performing with Rhythm Patterns
Saving a Rhythm Pattern Group
The edited rhythm pattern group is temporary, and will be lost
when you turn off the power or select another rhythm pattern
group.
If you want to keep the edited rhythm pattern group, write it to a
user pattern group in the FANTOM.
NOTE
When you execute the write operation, the existing data in the
write destination is overwritten.
1 .
Press the [WRITE] button.
The WRITE MENU screen appears.
2 .
Touch <RHYTHM PATTERN GROUP>.
The RHYTHM PATTERN GROUP WRITE screen appears.
3 .
If you want to edit the name, select [E1] RENAME.
After editing the name, select [E6] OK to close the window.
4 .
Use the [VALUE] dial or the [DEC][INC] buttons to
select the write-destination.
5 .
Select [E6] OK.
A confirmation message appears.
If you decide to cancel, choose [E5] CANCEL.
6 .
Select [E5] OK.
The rhythm pattern group is saved.
46
46
Changing the Tempo of the Rhythm Pattern
Here's how to change the tempo of the rhythm pattern.
MEMO
¹ The tempo that you specify here is common with the
arpeggio tempo (p. 41) and the sequencer tempo (p. 111).
¹ The tempo value is stored in the scene.
1 .
Press the [TEMPO] button.
The TEMPO screen appears.
Menu
Explanation
[E5] CLICK
If this is on, a click is heard at the specified tempo.
[E6] CLOSE
Closes the screen.
2 .
Use the [VALUE] dial or the [INC][DEC] buttons to
edit the tempo.
By holding down the [SHIFT] button while you perform this
operation, you can edit the two digits below the decimal
point.
MEMO
You can set the tempo by pressing the [TEMPO] button at the
desired interval ("tap tempo"). Press the button at least three times,
at quarter-note intervals of the desired tempo.
Saving the Rhythm Pattern Settings
Settings related to the rhythm pattern, such as the currently
selected rhythm pattern group, drum kit settings, KEY TRIGGER
settings, and tempo etc. are stored together in the current scene. If
you want to keep these settings, save the scene (p. 56).
Advertisement
Table of Contents
