Spirit CU 900 LED User Manual page 41

Step 4:
1. Attach CUP HOLDER (36) to CONSOLE MAST (2) using 2 SCREWS (54).
2. Attach CONSOLE MAST COVERS (37 & 38) over CONSOLE MAST (2) using 4 SELF-TAPPING
SCREWS (55).
3. Install PEDALS (11) into CRANK ARMS (9 & 10).The left pedal has a reverse thread and will be
screwed in counterclockwise. Tighten to 300 in-lb (34 Nm) of torque.
ATTENTION!
Make sure all screws are all firmly tightened after all parts have been installed.
41