Spirit CU 900 LED User Manual page 39

Step 2:
1. Run the WIRING HARNESS through the CONSOLE MAST (2) and out the top and install CONSOLE
MAST (2) to MAIN FRAME (1) with 6 BOLTS (52) and 6 WASHERS (112). Do not pinch any wires.
2. Connect HGP CONNECTOR CABLES (87 & 102) to CONSOLE (48). Run cables through center of
console bracket and out the back.
3. Connect all WIRING HARNESSES to corresponding connectors at the back of the CONSOLE (48)
and attach CONSOLE (48) to CONSOLE MAST (2) using 4 SCREWS (54). Be careful not to pinch
any wires.
39