Teledyne 4250 Installation And Operation Manual page 88

4250 Flow Meter
Section 2 Programming
2-60
If you select OFF, the program will advance to the next step, and
there will be no report A generated. If you select YES, the fol-
lowing will appear:
REPORT A DURATION TO BE IN
• HOURS • • DAYS • • MONTHS •
After you select the units of time, this will appear.
ENTER REPORT A DURATION
XX HOURS
DAYS or MONTHS could also appear, depending on what you
selected for the previous step. The time selected becomes the
time interval that will be covered in the report. Then the flow
meter will ask you when you want the first report printed:
PRINT REPORT A AT
YR: XXXX MONTH: XX DAY: XX HR: XX MIN: XX
Then:
REPORT GENERATOR B
• ON • • OFF • • (PRINT) •
The second report generator lets you program the flow meter to
print two independent reports at different intervals, for example.
This is useful for those who need both a weekly and a monthly
summary of activity on the flow meter. If you select OFF for this
step, the program will advance to the next step, and there will be
no report B generated. If you select YES, the following will
appear:
REPORT B DURATION TO BE IN
• HOURS • • DAYS • • MONTHS •
Select the appropriate interval for this second report. After you
select the units of time the following will appear:
ENTER REPORT B DURATION
XX HOURS
DAYS or MONTHS could also appear depending on what you
selected for the previous step. The time selected becomes the
time interval that will be covered in the report. Then the flow
meter will ask you when you want the first report printed:
PRINT REPORT A AT
YR: XXXX MONTH: XX DAY: XX HR: XX MIN: XX
After you have entered the desired date for the first report, the
program will advance to the following:
PRINT FLOW METER HISTORY
• YES • • NO •