Teledyne 4250 Installation And Operation Manual page 40

4250 Flow Meter
Section 2 Programming
2-12
If you press the right arrow key, the following options will
appear in this order on the display:
SETUP OPTIONS: 'EXIT' TO QUIT
• STATUS ENABLE/ALARM HYSTERESIS •
SETUP OPTIONS: 'EXIT' TO QUIT
• OPTIONAL OUTPUTS • • REPORT SETUP •
SETUP OPTIONS: 'EXIT' TO QUIT
• LCD BACKLIGHT • • (LANGUAGE) • • PROGRAM LOCK •
SETUP OPTIONS: 'EXIT' TO QUIT
• (LANGUAGE) • • PROGRAM LOCK • • PROGRAM •
US domestic models contain only English, plus one other foreign
language, as ordered.
If you select SET CLOCK, the following will appear:
YEAR MONTH DAY HOUR MIN
XXXX XX XX XX
Enter the year (four digits), the month (01-12), the day (01-31),
the hour (01-24), and the minute (01-59).
If you select SITE ID, the following will appear:
SITE ID: XXX
You can select any suitable three-digit number for the site identi-
fication.
If you select MEASUREMENT SETUP, the following will appear.
You will have to use the right arrow key to bring all the options
on screen:
MEASUREMENT SETUP
• LEVEL READING INTERVAL • (VELOCITY READING)•
MEASUREMENT SETUP
• (MINIMUM DEPTH)• •(ZERO LEVEL OFFSET)•
MEASUREMENT SETUP
• (ZERO FLOW ON ERROR)• •DO/PH READING INTER-
MEASUREMENT SETUP
• DO/PH READING INTERVAL• •YSI 600 READING INT-
LEVEL READING INTERVAL refers to how often the flow meter
takes a level reading. LEVEL refers to the level in the flow
stream.
XX