Teledyne 4250 Installation And Operation Manual page 187

Multisorb Technologies, Inc
Notes to Physician:
Section 5 Fire Fighting Measures
Flammable Properties:
Flash Point:
Flammable Limits:
Lower Flammability Limit: Not applicable
Upper Flammability Limit: Not applicable
Auto-ignition Temperature:
Hazardous Combustion Products:
Extinguishing Media:
Fire Fighting Instructions:
Unusual Fire and Explosion Hazards:
Explosion Data
Section 6 Accidental Release Measures
Sweep or vacuum up and place the spilled material in a waste disposal container. Avoid raising
Spill:
dust. Wash with soap and water after handling.
Section 7 Handling and Storage
Avoid raising dust and minimize the contact between worker and the material. Practice
Handling:
good hygienic work practices.
Store in a cool, dry location. Keep in sealed containers away from moisture. The silica gel
Storage:
will readily adsorb moisture.
Section 8 Exposure Controls/Personal Protection
Engineering Controls:
Respiratory Protection: Use NIOSH approved respirator when the air quality levels exceed the TLV's.
Skin Protection:
Eye Protection:
Silica gel, Indicating
Not applicable
Not flammable
Not applicable
Not flammable
Not applicable
Not applicable
Use extinguishing media that is appropriate for the surrounding fire. Silica gel is
not combustible.
Not combustible
None
Not sensitive to statistic discharge
Not sensitive to mechanical impact.
Use exhaust ventilation to keep the airborne concentrations below the exposure
limits.
Light cotton gloves will protest against abrasion and drying of the skin.
Safety glasses.
Exposure Limits
Appendix D Material Safety Data Sheets
February 14, 2009 Page 2 of 5
Not applicable
Method:
4250 Flow Meter
D-3