Teledyne 4250 Installation And Operation Manual page 5

4250 Flow Meter
Safety
General Warnings
Hazard Severity Levels
Before installing, operating, or maintaining this equipment, it is
imperative that all hazards and preventive measures are fully
understood. For information about general safety practices, turn
to Appendix C General Safety Procedures. While specific hazards
may vary according to location and application, take heed of the
following general warnings:
Avoid hazardous practices! If you use this instrument in
any way not specified in this manual, the protection
provided by the instrument may be impaired.
Éviter les usages périlleux! Si vous utilisez cet instrument
d'une manière autre que celles qui sont specifiées dans ce
manuel, la protection fournie de l'instrument peut être
affaiblie; cela augmentera votre risque de blessure.
This manual applies Hazard Severity Levels to the safety alerts,
These three levels are described in the sample alerts below.
Cautions identify a potential hazard, which if not avoided, may
result in minor or moderate injury. This category can also warn
you of unsafe practices, or conditions that may cause property
damage.
Warnings identify a potentially hazardous condition, which
if not avoided, could result in death or serious injury.
DANGER – limited to the most extreme situations
to identify an imminent hazard, which if not
avoided, will result in death or serious injury.
WARNING
AVERTISSEMENT
CAUTION
WARNING
DANGER
4250 Flow Meter
Safety
iii