Teledyne 4250 Installation And Operation Manual page 186

4250 Flow Meter
Appendix D Material Safety Data Sheets
Distributed by: Rainbow Technology Corp.
1.800.637.6047 or 205.733.0333
Product #: 79355
Section 1 Product and Company Information
Product Name:
Product Use:
Grades:
Synonyms:
Company;
Street Address:
City, State, Zip, Country:
Telephone Number:
Fax Number:
Website / E-Mail :
Section 2 Hazard Identification
Emergency Overview:
Potential Health Effects:
Eyes:
Skin:
Ingestion:
Inhalation:
Medical Effects Generally Aggravated by Exposure:
Chronic Effects/Carcinogenicity:
Section 3 Composition / Information on Ingredients
Component Name
Synthetic amorphous silica gel (SiO
Cobalt Chloride
While this material is not classified as hazardous under OSHA regulations, this MSDS contains valuable
information critical to the safe handling and proper use of this product. This MSDS should be retained and
available for employees and other users of this product.
Section 4 First Aid Measures
Eyes:
Skin:
Ingestion:
Inhalation:
D-2
Silica gel, indicating
Desiccant, absorbent
Silica gel indicating
Amorphous silica gel, SiO
Multisorb Technologies, Inc.
325 Harlem Road
Buffalo, NY 14224-1893 USA
(716) 824 8900 [USA] Monday - Friday (8:00 - 5:00 EDT)
(716) 824 4091 [USA]
multisorb.com
A blue to pink granular material that poses little or no immediate hazard. This
material is not combustible.
Dust and or product may cause eye discomfort and irritation seen as tearing and reddening.
The product dust may cause drying of the skin. Silica gel may get hot enough to burn skin
when it adsorbs moisture rapidly. Use an excess of water to cool the silica gel.
Material is not toxic and will pass through the body normally.
Slight irritation is possible but none is expected.
May cause eye, skin and mucous membrane irritation and drying.
)
2
Rinse eyes well with water while lifting eye lids. If irritation persists, consult a physician.
Wash affected area with soap and water.
Ingestion is unlikely, this material will pass through the body normally.
Remove the affected person to fresh air and get medical attention if necessary.
MATERIAL SAFETY DATA SHEET
February 14, 2009
Effective Date
MSDS Number M75
, silicon dioxide (amorphous)
2
Respiratory ailments.
CAS Number % by Weight
112926-00-8 100
7646-79-9 .5
Page 1 of 5