Flow Meter History Contents - Teledyne 4250 Installation And Operation Manual

2.4.13 Flow Meter History
Contents
The final step on the flow meter is FLOW METER HISTORY.
This step presents a record of the programming activity on the
flow meter that you can have printed on the printer. The flow
meter keeps a record of certain programming changes and prints
them out. If you select YES, the following will appear:
PRINT FLOW METER HISTORY
• PRINT SINCE LAST • • PRINT ALL •
If you select PRINT SINCE LAST, the flow meter will only print
the changes that have occurred since the last print request. If
there were no changes, there will be no print. If you select PRINT
ALL, the flow meter will print all the changes it has in memory,
as far back as 50 entries.
If you selected NO from PRINT FLOW METER HISTORY, the
flow meter will advance to CLEAR HISTORY - YES, NO.
If you select NO again, the flow meter will exit programming and
return to the normal display. If you clear the memory, previous
programming changes will be erased, but the flow meter will
again begin keeping track of changes the next time you change
the program.
D. O. ADJUSTED
pH ADJUSTED
LEVEL ADJUSTED
FLOW CONVERSION CHANGED
PLOTTER SPEED CHANGED
PLOTTER TURNED ON
PLOTTER TURNED OFF
TIME CHANGE FROM
TIME CHANGE TO
REPORT A CHANGED
REPORT B CHANGED
REPORT A TURNED ON
REPORT B TURNED ON
REPORT A TURNED OFF
REPORT B TURNED OFF
TOTALIZER RESET
INTERROGATED
SAMPLER ENABLED
SAMPLER DISABLED
ALARM ACKED BY #X
ALARM NOT ACKNOWLEDGED
YSI pH ADJUSTED
YSI D.O. ADJUSTED
YSI CONDUCTIVITY ADJUSTED
4250 Flow Meter
Section 2 Programming
2-61