Modified Calibration Tool Lab - GE OPTIMA MR360 Service Training

GE Healthcare

14. Modified Calibration Tool Lab

Description:
Time Required:
Learning
Objective(s):
Support Materials
Required:
Tools Required:
Safety
Considerations:
Steps:
Review:
MR5047 SV
This lab will familiarize the student with the modified calibration tool
in SV system, including LV Shim, DQA Tool II, Grafidy 3 and EPI white
pixel test.
2.5 hours
Navigate the service documentation

Practice the modified calibration tools

Service Methods procedures 5364191 on disk, or as loaded onto
system computer.
LV Shim Phantom Assembly

Nesting Plate Assembly

DQA III Phantom

Grafidy 3 Kit

Split Head Coil

1. Follow all LOTO procedures.
incorporated in the documented procedures
2. Take care when moving LV Shim phantom.
1. Use Modified Calibration Tool
Use documented procedure in Direction 5364191:
Installation / Install and Calibration Wizard for Signa Brivo
MR355/Optima MR360 / 4 Procedure / 4.4 Calibrations Guided
Flow
a. Perform a saveInfo to save the current calibration
b. Perform LV Shim
c. Perform DQA Tool II
d. Perform Grafidy 3
e. Perform EPI White Pixel test
f. Restore the saveInfo of the system
Questions for instructor:
______________________________________________________
______________________________________________________
______________________________________________________
They are posted in the lab and
Lab Guide
Page: 24 of 24