System Geography Lab - GE OPTIMA MR360 Service Training

GE Healthcare

1. System Geography Lab

Description:
Time Required:
Learning
Objective(s):
Support Materials
Required:
Tools Required:
Safety
Considerations:
Steps:
MR5047 SV
The purpose of this lab is to investigate and identify the major
components of the MR360 / MR355 System.
1 Hour
Identify the major subsystems and functions of the SV system
Service Methods procedures – 5364191, on disk, or as loaded onto
system computer
Handout as provided
Follow all LOTO procedures. They are posted in the lab as well as
incorporated as subset of documented procedure.
1. System Power-Down
Follow software and power shutdown procedure in Service
Methods 5364191
a. Shut down applications and turn system power off.
2. System Components Geography
Using the handout provided:
a. Match the subsystems and component names to the boxes
indicating their location.
identification
b. Remove covers as needed, for interior identification
3. For Simple Operator Console
a. Remove cover and expose right side components to view
location.
Do not disconnect any cabling
4. For Magnet
a. Remove cover and expose left side components to view
locations
Do not disconnect any cabling
5. For Penetration Panel
a. Remove access panel from scan room side to view locations.
Do not disconnect any cabling
6. For Rear Pedestal
a. View component locations
Do not disconnect any cabling
Open cabinet doors for interior
Lab Guide
Page: 2 of 24