GE OPTIMA MR360 Service Training page 101

The input power for THTF host should be 100~240VAC.
SCSI tower isn't used in SV system any more. Only one DVD-RW driver is installed in the
host. LFC, save and restore info are all executed by this driver. It is fixed by two screws
on the left side. There are no fixed screws on the other side. It is easy to be pulled out
with a little of force after removing the screws.
The glue on the bracket of the memory socket is to assure that the memory will not
become loose during transportation. Be careful to remove the glue when replacing the
memory.
99