Figure 6-1 Disconnecting A Fibre Optic Cable - Sun Microsystems Sun StorEdge A3500 Manual

Disconnecting a Fibre Optic Cable
FIGURE 6-1
5. Install the new fibre optic cable.
6. Reinstall the front panel on the controller module.
7. Restart I/O activity
8. Check the LEDs of both controllers for faults.
See Section 4.1.2 "Checking the Controller LEDs" on page 4-4.
9. Use the RAID Manager software to check the overall system status.
If you still cannot find the problem, it may indicate a failure of the controller back
panel. You may have to replace the controller card cage, which includes the back
panel. See Section 6.3.3 "Replacing a Controller Card Cage (Service Technician
Only)" on page 6-10.
Chapter 6 Servicing Other Components 6-3