Replacing The Mounting Rails; Figure 5-7 Removing The Mounting Screws At The Rear Of The Cabinet - Sun Microsystems Sun StorEdge A3500 Manual

2. Remove the two mounting screws from the back of the mounting rail (
FIGURE 5-7
3. Remove the mounting rail.
4. Remove the other mounting rail.
5.3.2

Replacing the Mounting Rails

See Section 2.2 "Installing the Mounting Rails" on page 2-6 for installing the
mounting rails in a new cabinet.
Removing the Mounting Screws at the Rear of the Cabinet
Chapter 5 Preparing for Service
).
FIGURE 5-7
5-9