7.7
Replacing the Battery Harness
(Service Technician Only)
Caution – This procedure involves disassembling the controller module to replace
!
internal components. Only qualified, trained service technicians should perform this
procedure.
Caution – Electrostatic charges can damage sensitive components. Use a grounding
!
wrist strap or other antistatic precautions before removing or handling the
controllers or other components in the controller module.
1. Remove the controller module from the expansion cabinet.
See Section 5.2 "Controller Module" on page 5-3.
2. Remove the controller card cage from the chassis.
a. Remove the eight screws that hold the card cage to the chassis (
FIGURE 7-9
7-14
Sun StorEdge A3500/A3500FC Controller Module Guide • August 1999
Removing Controller Card Cage Screws
).
FIGURE 7-9