b. Disconnect the DC power harnesses from the back of the power supply
housing (
Grasp the top, back edge of the power supply housing and pull until you have
enough room to disconnect the DC harnesses from it.
c. Lift the power supply housing out of the chassis (
i. Grasp the top, front edge of the power supply housing and lift it slightly
ii. Pull the housing firmly toward the front until the connectors on the
iii. Lift the power supply out of the chassis and set it aside.
Power supply housing
FIGURE 7-7
7-12
Sun StorEdge A3500/A3500FC Controller Module Guide • August 1999
).
FIGURE 7-5
(about one inch).
controller back panel exit the holes in the rear shield.
Rear shield
Chassis
Removing the Power Supply Housing
).
FIGURE 7-7