Connecting The Interface Cables; Figure 2-9 Differential Scsi Connectors - Sun Microsystems Sun StorEdge A3500 Manual

2.5

Connecting the Interface Cables

This section gives a generic instructions for attaching interface cables to the
controller module. For more configuration options, refer to the Sun StorEdge A3500/
A3500FC Hardware Configuration Guide (part number 805-4981-xx).
Tools: None
Equipment: SCSI bus cables, SCSI drive cables, terminators, and tie wraps
1. Install 16-bit, differential terminators to both HOST OUT connectors on the back
of the controller module (
DIFF SCSI HOST IN BD1
DIFF SCSI HOST OUT BD1
DIFF SCSI HOST IN BD2
DIFF SCSI HOST OUT BD2
FIGURE 2-9
FIGURE 2-9
DIFF SCSI ARRAY 2
Differential SCSI connectors
).
DIFF SCSI ARRAY 1
DIFF SCSI ARRAY 3
Rear
Chapter 2
DIFF SCSI ARRAY 5
DIFF SCSI ARRAY 4
Installation 2-13